Dell PowerVault 124T Uživatelský manuál Strana 47
- Strana / 57
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
l Verify that the autoloader operates correctly when properly configured and attached directly to a host
system using a cross-over cable.
l If all previous steps fail, see Contacting Dell.
Error
52
IP Stack Can't Free Memory
53
Stack DTrap Occurred
Loader Task Error Types
60
Drive Init Failed
l Check support.dell.com for PowerVault 124T firmware updates.
l Check the TapeAlert log for more specific drive error information. Refer to Table 3 for recommended
actions.
l Power cycle the autoloader using the front panel power button and retry the operation.
l If all previous steps fail, see Contacting Dell.
61
Drive Login Error
62
Drive Logout/Unexpected Error
63
Drive Command Failed
64
Drive Response Timeout
65
Command Flushed From Queue
66
Drive Manager Not In Correct
State
67
Drive Reporting Not Ready
68
Autoclean Move Failed
l Check the Remote Management Unit autoclean Configuration settings. Insure that a valid cleaning
cartridge is located at the configured location.
l Verify that the cleaning cartridge does not have labels or other matter placed anywhere on the
cartridge except where labels are expected to be placed.
l Try a different cleaning cartridge.
l If the operation fails with two different cleaning cartridges, see Contacting Dell.
69
Drive Unload Retry
l Check the TapeAlert log for more specific drive error information. Refer to Table 3 for recommended
actions.
l Verify that the cleaning cartridge does not have labels or other matter placed anywhere on the
cartridge except where labels are expected to be placed.
l Try to load a different piece of media.
l Power cycle the autoloader using the front panel power button and retry the operation.
l If all previous steps fail, see Contacting Dell.
6D
Drive Communications Error
l Check support.dell.com for PowerVault 124T firmware updates.
l Check the TapeAlert log for more specific drive error information. Refer to Table 3 for recommended
actions.
l Power cycle the autoloader using the front panel power button and retry the operation.
l If all previous steps fail, see Contacting Dell.
6E
Drive Communications Error
6F
Loader Communication Error
Code Update Error Types
70
Failed to Send CUP Cmd to
Drive / No Response From Drive
l Verify the firmware images for both the autoloader and drive are the most recent images located at
support.dell.com.
l Review the firmware update readme file provided with the firmware images.
Note: The recommended method for drive firmware update is through the host interface using the
DFU utility provided with the firmware images. The recommended method for loader firmware update
is through the Remote Management Unit.
l Verify all SAS cable connections between the host and autoloader.
l Verify no media in drive during update.
l Power cycle the autoloader using the front panel power button and retry the operation.
l If all previous steps fail, see Contacting Dell.
71
CUP Send Failed
72
Drive Update Failed, Media
Present
73
Image Size in Header Too Big
74
Block Erase Failed
75
Flash Program Failed
76
Header Corrupt
77
Checksum Error
78
Timeout During CUP
79
Reset During Drive Update
7A
Unexpected Reset From Drive
7B
Unexpected Message From PSP
7C
Personality or Version Check
Failed
7D
Error During Write Buffer
Command
7E
Uncompressed EDC Failure
7F
Image Processing Ended Early
Server Task Error Types
80
Unexpected Response or Data
Received
l Verify the host backup application and device driver are at the latest supported revision at
support.dell.com.
- Notes, Notices, and Cautions 1
- Setting Ethernet 3
- Setting the Subnet Mask 4
- Setting an IP Gateway 4
- Setting the SNMP Server 4
- Setting the Time 5
- Barcode Reader 6
- SCSI Barcode Length 6
- Setting Magazines 6
- Setting Security 6
- Setting Passwords 7
- Getting Help 8
- Autoloader User's 9
- RMU Diagnostic Tests 10
- Technical Assistance 11
- AutoTech Service 12
- Problems With Your Order 13
- Product Information 13
- Before You Call 14
- User's Guide 15
- Bar Code Reader 16
- Product Overview 16
- UL Requirements 16
- Unpacking the Autoloader 17
- Tape Drive Device Driver 20
- Autoloader Device Driver 20
- Overview 22
- Using Cartridges 24
- Ejecting a Single Cartridge 25
- Ejecting a Magazine 26
- Installing a Magazine 26
- Running an Inventory 28
- Viewing Status Information 28
- Viewing Element Status 29
- Viewing Tape Drive Status 29
- Viewing Tape Drive Version 29
- Viewing Ethernet Information 29
- Configuration Page 32
- Compression 33
- Cleaning Tape 33
- Setting the Magazines 33
- Setting the System Time 34
- Setting Network Options 34
- Firmware Page 36
- Library Operations Page 37
- Back to Contents Page 38
- Tape Drive Specifications 40
- Checking for Errors 43
- Autoloader Logs 44
- TapeAlert Logs 52
- Packing the Autoloader 57
Související produkty a manuály pro Počítačový hardware Dell PowerVault 124T
(13 stránky)
(54 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce