Dell PowerVault DL2000 Uživatelský manuál Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 52
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
1. configuration switch
Figure 2. Setting the PowerVault MD1200 Storage Enclosure Configuration Switch
1. configuration switch
Connecting The Storage Enclosure To The PowerVault DL2
x
00 System
Connect the SAS data cable from the PowerEdge RAID Controller (PERC) installed in the PowerVault DL2
x
00 system to
the primary Enclosure Management Module (EMM) SAS In port of the storage enclosure. For more information, see the
figures below.
NOTE: Do not connect tape devices to the PERC adapter. For more information about the proper configuration, see
figure Connecting the PowerVault DL2
x
00 System to the Storage Enclosure and Optional Tape Library.
Figure 3. Connecting the SAS Cable From the PowerVault DL2
x
00 System to the PowerVault MD1000 Storage Enclosure
11
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Komentáře k této Příručce

Žádné komentáře