
Alignment and Troubleshooting
4-10
4.1.3.4 In the paper exit area
If paper is jammed in the paper exit area, follow the next steps to release the jammed paper.
1. If a long portion of the paper is visible, pull it
straight out. Open and close the front cover
firmly. The machine will resume printing.
If you cannot find the jammed paper, or if there is
any resistance removing the paper, stop pulling
2. Open the scan unit.
3. Open the cover of reverse unit using the handle
on it and carefully take the jammed paper out of
the machine.
If there is any resistance removing the paper or
difficulty picking up jammed paper, stop pulling
and turn the release knob to the direction as
4. Close the cover of reverse unit.
green roller
and go to step 2. Pull the jammed paper out of the machine.
shown to remove the
misfed paper.
You can turn the exit roller eas
ily by turning the
indicated
green roller.
Komentáře k této Příručce