Dell Chassis Management Controller Version 4.3 Průvodce řešením problémů Strana 1

Procházejte online nebo si stáhněte Průvodce řešením problémů pro Sítě Dell Chassis Management Controller Version 4.3. Dell Chassis Management Controller Version 4.3 Troubleshooting Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 10
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Dell Chassis Management Controller Firmware
Version 4.3
Troubleshooting Guide
Zobrazit stránku 0
1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - Troubleshooting Guide

Dell Chassis Management Controller Firmware Version 4.3Troubleshooting Guide

Strany 2 - Notes, Cautions, and Warnings

– CMC Web interface: Go to Chassis Overview → Troubleshooting → Reset components . In the Reset column, select iDRAC Reset option.NOTE: Do not select

Strany 3 - Introduction

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

Strany 4

IntroductionThe Dell Chassis Management Controller Firmware Version 4.3 Troubleshooting Guide provides solutions for few issues you may see while usin

Strany 5

If the prompt indicates a self test failure, there are no serviceable components on CMC. Then, replace the CMC card.If the prompt indicates Bad Firmwa

Strany 6 - CMC Shows Redundancy Lost

* CMC Web Interface: Go to Chassis Overview → Logs to view the CMC logs.* RACADM: Use the getsel, getraclog or gettracelog commands.Check if the PSU c

Strany 7

– RACADM: Use the getsel, getraclog, or gettracelog commands.3. If the problem persists, reset CMC to factory default settings.NOTE: This command comp

Strany 8 - Fabric Mismatch

Modular Server in the Chassis is Not Accessible1. Make sure that the modular server is in powered ON state. To check the modular server condition, log

Strany 9 - CMC Disconnects From iDRAC

Fabric MismatchThe first modular server or IOM inserted in the chassis decides the uniformity and sequence of a Fabric type. Fabric mismatch is notice

Strany 10 - Other Documents You May Need

NOTE: When power supply redundancy is enabled, a PSU in the chassis is utilized as a spare, ensuring that the failure of any one PSU does not cause th

Komentáře k této Příručce

Žádné komentáře