Dell PS-M4110 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Servery Dell PS-M4110. Dell EqualLogic PS-M4110 Blade Array Technical Article Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Dell EqualLogic Technical Article
Dell EqualLogic PS-M4110 Blade
Array Technical Article
Zobrazit stránku 0
1 2 3 4 5 6 ... 21 22

Shrnutí obsahu

Strany 1 - Array Technical Article

Dell EqualLogic Technical Article Dell EqualLogic PS-M4110 Blade Array Technical Article

Strany 2

5 Switch configuration Any of the currently available 10Gb Ethernet IO modules can be used as SAN switches within this reference architecture. The

Strany 3 - Table of contents

FTOS (conf-if-range-fo-1/33-37) port-channel-protocol LACP FTOS (conf-if-range-fo-1/33-37-lacp) port-channel 1 mode active FTOS (conf-if-range-fo-1/

Strany 4 - Acknowledgements

5.2 PowerConnect M8024-K 5.2.1 iSCSI Auto-Configuration The PowerConnect M8024-k IO module supports the “iSCSI Auto-configuration” feature. When

Strany 5 - 1 Executive summary

Spanning Tree is a global configuration setting for the PowerConnect M8024k. Spanning Tree is enabled by default on the PowerConnect M8024k. Rapid

Strany 6

console(config-if)#channel-group 1 mode auto console(config-if)#mtu 9216 console(config-if)#exit console(config)#interface port-channel 1 consol

Strany 7

Create the stack on switch 2: Put ports into stacking mode. Ports 17-20 were used as stacking ports. console#configure console(config)#stack cons

Strany 8 - 4.3 Array information

5.3.2 LACP Member Port configuration: M8428-k> M8428-k>en M8428-k#conf t M8428-k (conf) #interface Extengigabitethernet 0/17 M8428-k (conf-if

Strany 9 - SAN Stack

6 General recommendations and guidelines • Recommend for use with general purpose small-medium sized consolidated loads. • Not recommended for pu

Strany 10 - 5 Switch configuration

A. Port Map This appendix contains the port mapping information for the IOMs used during testing. During testing of each M-Series IO Module, the bla

Strany 11

Figure 5 Force10 MXL External port map Figure 6 PowerConnect M8024-k and M8428-k common internal port map M620-1P1 P1 P1 M620-1P2M620-2P1 P

Strany 12 - 5.2 PowerConnect M8024-K

THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE

Strany 13

Figure 7 PowerConnect M8024-k External port map Figure 8 PowerConnect M8428-k External port map

Strany 14

B. Additional resources • Dell Tech Center EqualLogic Whitepapers: http://en.community.dell.com/techcenter/storage/w/wiki/2632.storage-infrastructu

Strany 15 - 5.3 PowerConnect M8428-k

THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONT

Strany 16

Table of contents 1 Executive summary ...

Strany 17

Acknowledgements This whitepaper was produced by the PG Technical Marketing for EqualLogic Infrastructure and Networking. The team that created this

Strany 18 - A. Port Map

1 Executive summary This paper provides guidance for incorporating a data center-in-a-box solution with the new Dell EqualLogic™ PS-M4110 Blade Arr

Strany 19

4 Reference architecture overview The Storage Interoperability Lab conducted preliminary testing on a self-contained M1000e based data center-in-a-

Strany 20

Figure 2 Blade Chassis configuration (Front) 4.1.1 Additional configuration information Chassis Management Console (CMC) version: 4.1 EqualLogic

Strany 21 - B. Additional resources

4.2 IO module information LAN IO modules were installed in Fabric Slots A1 and A2 for all tests. SAN IO modules were installed in Fabric Slots B1 a

Strany 22

Figure 3 Sample MXL datacenter in a box solution LAN/Client NetworkLAN-to-Agg UplinksSAN StackSANSANLAN LANSAN Stack

Komentáře k této Příručce

Žádné komentáře