Dell OpenManage Server Administrator Version 5.4 Uživatelský manuál stáhnout pdf (Strana 143)

Using the Storage Management Service 141

omreport Virtual Disk Status

Table 6-14 describes the syntax for the omreport Virtual Disk Commands

omconfig Global Commands

The following sections provide the omconfig command syntax required to

execute the global commands. When executed, these commands apply to all

controllers. These global commands also correspond to the global tasks

provided by the Storage tree view object’s Information/Configuration

subtab.

omconfig Global Enable Smart Thermal Shutdown

By default, the operating system and server shut down when the PV220S and

PV221S enclosures reach a critical temperature of 0 or 50° Celsius. However,

if you have implemented

connector redundancy on the PV220S and PV221S

enclosures you can specify that only the enclosure and not the operating

system and server be shut down when the enclosure reaches a critical

Table 6-14. omreport Virtual Disk Commands

Required Command

Levels (1, 2, 3)

Optional name=value pairs Use

omreport storage vdisk Displays property information for

all virtual disks on all controllers.

controller=id

where id is the controller number.

For example: controller=0.

Displays all virtual disks on the

specified controller.

controller=id vdisk=id

where id is the controller number

and the virtual disk number. For

example: controller=0 vdisk=1.

Displays the specified virtual disk

on the controller.

Table 6-15. omconfig Global Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage globalinfo

action=enablests

action=disablests

action=globalrescan

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 257 258

Žádné komentáře

Dell OpenManage Server Administrator Version 5.4 Uživatelský manuál Strana 143