Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Instalační manuál Strana 18

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 60
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 17
18 Setting Up the Cluster
c
Add the following values:
UsePersistentReservation
REG_DWORD
d
Setting this value to
1
enables Persistent Reservation.
PersistentReservation KeyREG_BINARY <PR key>
. This is an
8-byte binary value that is unique to the cluster. The same binary
value must be used on all nodes in the cluster.
3
Set the disk time out to
60
.
Set the value of
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\dis
k\TimeOutValue
to
60
seconds.
4
Set recovery of the iSCSI service:
a
Select
Start
Run
and type
Services.msc.
b
Double click on the
MS iSCSI initiator services.
c
Select
Recovery
tab for directions to start recovery if the initiator
service fails.
d
Select
Restart the Service
for all three scenarios.
e
Set the
Restart service after
value to
0
.
5
From the first node, set up a PS Series group and create the volumes
required for the cluster environment.
Create the following volumes:
Quorum resource volume. Microsoft requires that you configure the
quorum disk with a size of 512 MB.
Volumes for service data, as needed.
Ensure that you have created one or more access control records for each
data volume to allow only the cluster nodes access to the volume. In
addition, reserve Snapshot space for each volume if you want to create
volume snapshots or use Auto-Snapshot Manager for VSS backups. For
more information, see "Setting Up the Dell|EqualLogic PS Series SAN" on
page 21.
6
Optimize the SAN network for performance.
For more information, see the EqualLogic Technical Report
Network
Connection and Performance Guidelines
.
Book.book Page 18 Monday, February 4, 2008 1:26 PM
Zobrazit stránku 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Komentáře k této Příručce

Žádné komentáře