Dell Acceleration Appliances for Databases Uživatelský manuál Strana 18

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 89
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 17
4. Select “Statically assigned IP Address” as shown above.
5. Type the IP address and subnet mask for your network, using the screen above as a guide.
6. Select OK.
7. Click Next to return to the Network Settings Overview screen.
CONFIGURING ADDITIONAL DEVICES
The process for configuring additional network devices is essentially the same as what was done for
the management port:
1. Select the next unconfigured device.
2. Complete the fields in the Network Card Setup Address screen as described in the previous
section.
3. Click Next to return to the Network Configuration Overview screen.
Cluster Interconnect Guidelines
It is strongly recommended to use well-known static IP addresses for the cluster
interconnect, such as 192.168.1.1 and 192.168.2.1 for one node, and 192.168.1.2 and
192.168.2.2 for the other.
Ensure that the IP addresses are correct for HA connectivity.
Ensure that two NIC ports have been configured, one for each HA node.
11
Zobrazit stránku 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 88 89

Komentáře k této Příručce

Žádné komentáře