Dell PowerVault 124T Uživatelský manuál Strana 51
- Strana / 73
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Unit (RMU) or the Operator Control Panel (OCP).
Note: The Random Moves test requires a minimum of two
cartridges present within the autoloader.
If the source is a slot within a magazine, check if the spring
loaded cartridge present flag moves freely when the cartridge is
manually inserted into the magazine.
If all previous steps fail, see Contacting Dell.
AB Drive Path Sensor Error
Power cycle the autoloader through the front panel.
Run the Random Moves test from either the Remote Management
Unit (RMU) or the Operator Control Panel (OCP).
Note: The Random Moves test requires a minimum of two
cartridges present within the autoloader.
If all previous steps fail, see Contacting Dell.
AC Mail Slot Door Sensor
Error
Power cycle the autoloader.
Insert a cartridge into the autoloader through the mail slot. Verify
the cartridge is sensed and the door closes fully.
If all previous steps fail, see Contacting Dell.
AD Mail Slot Solenoid Error
AE Servo Initialization Error
Remove and inspect the magazines one at a time. Turn the white
thumbwheels on each magazine and ensure that the carriers
move freely at least one full rotation in each direction. Re-insert
each magazine after inspection.
Check the barcode reader setting through either the Remote
Management Unit or the Operator Control Panel.
If the barcode reader is enabled, verify that all cartridges have
valid barcode labels. If cartridges do not have valid barcode
labels, disable the barcode reader.
Check support.dell.com for PowerVault 124T firmware updates.
Power cycle the autoloader.
Run the Random Moves test from either the Remote Management
Unit (RMU) or the Operator Control Panel (OCP).
Note: The Random Moves test requires a minimum of two
cartridges present within the autoloader.
If all previous steps fail, see Contacting Dell.
AF Error Log Information
Event
Used to analyze start of servo/motor error sequence in the Soft Error
Log. Error entries immediately following indicate nature of specific
motor/position error.
No action required.
Servo Picker Hardware Error Types
B0 Rotation Sensor Bad
Power cycle the autoloader.
Run the Random Moves test from either the Remote Management
Unit (RMU) or the Operator Control Panel (OCP).
B1 Rotation Flag Not Found
B2 Rotation Flag Bad
- Notes, Cautions, and Warnings 1
- Installation Overview 2
- Installation Preparation 2
- Host Bus Requirements 2
- Accessories 2
- Choosing a Location 2
- UL Requirements 3
- Product Overview 3
- Unpacking the Autoloader 4
- Enabling LUN Support in Linux 6
- User's Guide 8
- Using Cartridges 9
- Ejecting a Single Cartridge 10
- Ejecting a Magazine 11
- Installing a Magazine 11
- Running an Inventory 13
- Viewing Status Information 13
- Viewing Tape Drive Version 14
- Viewing Firmware Version 14
- Viewing Element Status 14
- Viewing Tape Drive Status 14
- Internet Protocol Version 6 15
- Default Username and Password 18
- Opening the RMU 18
- Configuration Page 20
- Bar Code Reader 21
- Cleaning Tape 21
- Setting the Magazines 22
- Setting the System Time 22
- Setting Network Options 23
- Firmware Page 25
- Running Diagnostics Tests 26
- Library Operations Page 27
- Set to Home 28
- Configuring the Autoloader 29
- Setting Ethernet 30
- Setting the IP Address 31
- Setting the Subnet Mask 31
- Setting an IP Gateway 32
- Setting the SNMP Server 32
- Setting the Time 33
- Barcode Reader 34
- SCSI Barcode Length 34
- Setting Magazines 35
- Setting Security 35
- Setting Passwords 35
- Getting Lost Passwords 36
- Autoloader User's Guide 37
- RMU Diagnostic Tests 38
- Diagnostics Using the RMU 39
- Checking for Errors 42
- Autoloader Logs 43
- TapeAlert Logs 55
- TapeAlert Interpretation 56
- TapeAlert Logs through RMU 56
- Packing the Autoloader 64
- Physical Specifications 65
- Tape Drive Specifications 68
- Technical Assistance 70
- Online Services 71
- AutoTech Service 71
- Problems With Your Order 72
- Product Information 72
- Before You Call 73
Související produkty a manuály pro Počítačový hardware Dell PowerVault 124T
Počítačový hardware Dell KVM 4322DS Uživatelský manuál
(114 stránky)
(114 stránky)
(151 stránky)
Počítačový hardware Dell KVM 4161DS Uživatelský manuál
(124 stránky)
(124 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.086 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce