Dell Inspiron One 2205 (Mid 2010) Uživatelský manuál Strana 27

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 74
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 26
Back to Contents Page
Processor Heat-Sink
Dell™Inspiron™One2205ServiceManual
Removing the Processor Heat-Sink
Replacing the Processor Heat-Sink
Removing the Processor Heat-Sink
1. Follow the instructions in Before You Begin.
2. Remove the back cover (see Removing the Back Cover).
3. Follow the instructions from step 3 to step 7 in Removing the Front Stand.
4. Remove the rear stand cover (see Removing the Rear Stand Cover).
5. Remove the system-board shield (see Removing the System-Board Shield).
6. Remove the MXM-assembly fan (see Removing the MXM-Assembly Fan).
7. Remove the MXM assembly (see Removing the MXM Assembly).
8. Remove the processor heat-sink fan (see Removing the Processor Heat-Sink Fan).
9. Remove the two screws that secure the processor heat-sink to the chassis.
10. In sequential order (indicated on the processor heat-sink), loosen the four captive screws that secure the processor heat-sink to the system board.
11. Carefully lift the processor heat-sink away from the computer.
Replacing the Processor Heat-Sink
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: The heat sink may be very hot during normal operation. Ensure that it has had sufficient time to cool before you touch it.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor heat-sink. The oils in your skin
can reduce the heat transfer capability of the thermal grease.
1
processor heat-sink
2
captive screws (4)
3
screws (2)
Zobrazit stránku 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 73 74

Komentáře k této Příručce

Žádné komentáře