Dell E5250 Uživatelský manuál stáhnout pdf (Strana 17)

Installing the Palmrest

1. Place the palmrest on the computer.

2. Connect the following cables to their connectors on the system board:

a. LED board

b. USH board

c. touchpad board

3. Tighten the screws at the front and back of the computer to secure the palmrest.

4. Install the:

a. keyboard

b. keyboard trim

c. battery

d. base cover

5. Follow the procedures in After Working Inside Your Computer

Removing the SmartCard Reader Board

NOTE: This component is sold separately and is not shipped with the computer.

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

a. base cover

b. battery

c. memory

d. keyboard trim

e. keyboard

f. palmrest

3. Perform the following steps:

a. Disconnect the SmartCard reader board cable from the USH board [1] [2].

b. Peel the cable to release from the adhesive [3].

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

Žádné komentáře

Dell E5250 Uživatelský manuál Strana 17