Dell PowerVault 136T Specifikace stáhnout pdf (Strana 96)



Figure 16. Offline Confirmation Dialog

Step 2 Press the button beneath the OK softkey.

l The Offline Dialog is displayed. See Figure 17.



Figure 17. Offline Dialog

Step 3 Visually confirm that the Dell PowerVault 136T LTO Library has changed to the Offline state.

l The picker completes the current task. The upper center screen text line changes to Offline.

Step 4 Locate the Front Power Switch on the upper right front panel.

Step 5 Push the Front Power Switch inward to remove power to the electronics.

WARNING: Power is still present inside the library. Exercise extreme care when working inside the library.

Step 6 Locate the Rear Power Switch on the lower right corner of the back panel.

Step 7 Push the rocker Rear Power Switch to the bottom to remove power.

l Power is removed from the Dell PowerVault 136T LTO Library.

Emergency Shutdown

CAUTION: Use the method described in Emergency Shutdown in cases of emergency only.

Use the following procedure if an emergency situation arises.

Step 1 Locate the Rear Power Switch on the lower right corner of the back panel.

Step 2 Push the rocker Rear Power Switch to the bottom to remove power.

l Power is removed from the Dell PowerVault 136T LTO Library. All picker movements halt immediately.

Library Restart

Use the following procedure to restart the Dell PowerVault 136T LTO Library.

Step 1 If applicable, correct any situations that required the shutdown of the Dell PowerVault 136T LTO Library.

Step 2 Ensure that the front door is closed and mechanically locked.

Step 3 Locate the Rear Power Switch on the lower right rear panel.

Step 4 Push the rocker Rear Power Switch towards the top to apply power.

Step 5 Locate the Front Power Switch on the upper right front panel.

Step 6 Push the Front Power Switch inward to apply power to the electronics.

Back to Contents Page

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 107 108

Žádné komentáře

Dell PowerVault 136T Specifikace Strana 96