Dell Dimension L___cx Uživatelský manuál stáhnout pdf (Strana 28)

2-44 Dell Dimension L Series Systems Reference and Troubleshooting Guide

Rotating the Power Supply Away From the

System Board

To access components on the system board, you must rotate the power supply out of

the way by performing the following steps:

1. Remove the computer cover as instructed in the previous section, “Removing

and Replacing the Computer Cover.”

2. Lay the computer on its side as shown in Figure 2-2.

3. Press the release latch (see Figure 2-2) while lifting the power supply. Rotate the

power supply out of the chassis while keeping the power cables clear. bles clear.

Figure 2-2. Rotating the Power Supply

When you rotate the power supply back into the chassis, gently lift the cable retainer

and hold the drive cables out of the way. Rotate the power supply into position until

its release latch clicks. Wrap the drive cables along the top of the latch in the retainers

as shown in Figure 2-3.

cable retainer

power supply

release latch

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 161 162

Žádné komentáře

Dell Dimension L___cx Uživatelský manuál Strana 28